KPT-884-SW 是一款高输出低音反射影院低音炮,采用先进的低频 4 英寸音圈驱动单元设计。这套系统厚度不到 23 英寸,采用单个 18 英寸驱动单元,通过利用具有最佳几何形状的大型结构和轻便的锥盆实现高效率。事实上,KPT-884-SW 能够发出极具震撼力的 18Hz 超低频率声音。
• 先进的低频 4 英寸音圈驱动单元设计
• 18 英寸驱动单元
• 轻巧的锥盆
DESIGNED AND MADE IN THE USA
USING DOMESTIC AND IMPORTED COMPONENTS
In 1946, Paul W Klipsch, genius & maverick, hand-built his frst loudspeaker in a tin shed with the intention of bringing live music into his living room. Remember great sound? We do, too. Today, Klipsch’s cinema speaker enclosures are made in the USA, by proud craftsmen in Hope, Arkansas. Just like PWK intended.
产品概述:
The low-profle Klipsch KPT-884 highoutput cinema subwoofer uses an advancedlow-frequency 4-inch voice coil driver design mounted in a bass reflex enclosureto shake things up and deliver deep, driving bass.
Less than 23 inches in depth, this system utilizes a single 18-inch driver that gains its high effciency through the use of large, geometrically optimized structures and a lightweight cone.
Built from the inside out for performance and durability, the KPT-884 packs a punch that lets audiences hear as well as feel the impact of edge-of-your-seat entertainment. In fact, it is capable of delivering an earth-shaking low frequency
of 18Hz.
规格参数:
FREQUENCY RESPONSE1 (+/- 3 dB) |
27Hz–240Hz 9–10dB @ 18Hz) |
POWER HANDLING2 |
1200 watts (92V) |
CALC. MAX. CONT. OUTPUT3 |
128dB |
SENSITIVITY4 |
98dB |
NOMINAL IMPEDANCE |
8 ohms (7.2 min. @ 23Hz) |
TRANSDUCERS |
One K-472-E 18” subwoofer |
INPUT CONNECTION |
Two point barrier strip |
HEIGHT |
49.75” (126.4cm) |
WIDTH |
35.75” (90.8cm) |
DEPTH |
22.5” (57.2cm) |
WEIGHT |
140lbs (63.5kg) |
ITEM NUMBER |
097154011316 |
推荐最小功放功率 |
2400W@8Ω |
1. 3M, Half-spaced anechoic
2. AES standard, continuous pink noise, 6 dB peaks
3. Calculated at 1M half-spaced at power handling power input
4. SPL at 1M, half-spaced anechoic with 2.83V input
返回顶部